4
Module Layout
6.3
Modules
Quick STOP Module
Further Modules
The machine pushbuttons can be customer-specific wired.
Fig. 6-5:
Quick STOP module
The quick STOP module is provided with a white lit and a red unlit
machine pushbutton. The two pushbuttons can be user-specific labeled
with a labeling strip.
The white lit machine pushbutton has a NC contact (contact designation 1
and 2), a NO contact (contact designation 3 and 4) and a 24 V LED
(contact designation X1 and X2).
The unlit red machine pushbutton provides only a NC contact (contact
designation 1 and 2) and a NO contact (contact designation 3 and 4).
In future, e. g. a handwheel module or a blind plate are provided for the
fifth module slot.
VAM 10.1 / VAM 40.1
Schnell_STOP_Modul.FH9
DOK-SUPPL*-VAM*10/40**-PR02-EN-P