Displaying Additional Information - Bosch FPA‑5000 User Manual

FPA-5000 | FPA-1200 | AVENAR panel 8000 |
AVENAR panel 2000 | AVENAR keypad 8000
Notice!
Depending on the configuration of the system, either the logical or physical address of the
detector is displayed.
Message number
For information on the message number (#002), see Information about logical zones in the
alarm state.
Depending on the configuration, additional information is displayed in the second line, such as
the installation location of the detector or the detector type.
To display more information about an alarm message, see Displaying additional information.
8.4.8

Displaying additional information

Notice!
By way of example, an action text can be entered for every detector type in the FSP-5000-RPS
programming software.
To display further information about the individual detectors, select the alarm message you
require.
The following information is displayed:
–
–
–
–
–
–
Bosch Sicherheitssysteme GmbH
Element category
Message type
Date and time of the message
Physical and logical addressing of the detector
Only for LSN detectors: specification of the detector type
Action text (depending on the configuration)
User Guide
Alarm | en 39
2020-07 | 3.0 | F.01U.378.877