Starting And Ending Walktest; Starting The Walktest - Bosch FPA‑5000 User Manual

FPA-5000 | FPA-1200 | AVENAR panel 8000 |
AVENAR panel 2000 | AVENAR keypad 8000
In order to add new elements:
1.
2.
3.
4.
Change name
To change the name of the input or output group:
1.
2.
15.2

Starting and ending walktest

Notice!
The information about the date and time of every walktest is stored in the history log. You can
print this information on a printer. See Maintenance – history log, page 69 .
15.2.1

Starting the walktest

To select the elements for the walktest and to switch them to walktest:
1.
2.
3.
4.
Notice!
If you select the element category Loop, Logical zone, Detector or Walktest group, you will
be asked to select the type of walk test. Select Sequential walktest to check each individual
sensor (optical, chemical or thermal) of the detectors you are testing, or select Simultaneous
walktest to test combination detectors using a test device with combined trigger substances
for simultaneous testing of multiple sensors.
Example:
1.
2.
3.
4.
Bosch Sicherheitssysteme GmbH
Select New.
The display changes. Various element categories containing elements which have not
been assigned to any walktest group yet are displayed.
Select the element category you require.
Select one or more list fields.
The list fields are marked.
Select Add.
The selected element is added to the selected walktest group.
Overwrite the name; see Entering numbers and text, page 27 .
Select OK.
The new name is confirmed.
In the start menu, select Maintenance
Walktest
Start / End walktest
Various element categories are displayed.
Select:
– More... to display further categories or
– one of the displayed categories or
– Select by number and enter the number of the element into the search screen; see
also Search Function/Element, page 26 .
Select Walktest group.
Select Sequential walktest or Simultaneous walktest
A list of walktest groups is displayed. Refer to Scrolling through lists, page 25 for
information on how to navigate through a list.
Select the list field you require.
The field is marked.
Select On.
The selected walktest group is switched to walktest.
User Guide
Maintenance – walktest | en
2020-07 | 3.0 | F.01U.378.877
67