ADC SG-1 User Manual page 99

June 30, 2006
Parameter
<slot >
<port number>
<sub-interface number>
<ppp | routed-bridge |
routed routed-bridge-
ppp>
point-to-point |
point-to-multipoint
<ip address>
<mask>
<loopback interface
number>
<1500 | 1544>
Example(s)
Host(config)# interface atm 2\1\1 <cr>
Host(config)# interface atm 2\1\1 type routed point-to-point ip 192.168.1.2
255.255.255.0 <cr>
Host(config)# interface atm 2\1\1 type routed-bridge point-to-point loopback 1 <cr>
Host(config)# no interface atm
After this command is run, the system deletes the ATM interface, as well as all of the enabled applications for this
interface (such as, PPPoE, PVC, PPPoA, etc.).
Usage
no interface atm <slot number>\<port number>\<sub-interface number>
For parameters and examples, refer to
SG1-UM-8500-03
Table 7-6. interface atm command parameters
Description
PMC slot number
SONET physical port number
Sub-interface number
Sub-interface type
Network topology type
Interface IP address
Interface mask
Loopback interface number
MTU value
Table 7-6.
Chapter 7: Second Level Commands
Legal values/range
1-2
1
1- 2000
ppp - supporting PPPoE and PPPoA
routed - routing capability only (IP over ATM)
routed-bridge - bridge and routing capability (IP
over Ethernet)
routed-bridge-ppp - bridge and routing
capability (PPP and IP over Ethernet
simultaneously)
(Default value: ppp)
point-to-point
point-to-multipoint
IP address
Mask
Number
1500, 1544
7-19