ADC SG-1 User Manual page 210

Appendix B: Redirection Server
Parameter(s)
<IP address>
It is the Permitted source IP address.
<source mask>
It is the Permitted source mask.
Example:
RDSHost(config)> access-list SNMP-permit 192.168.1.0 255.255.255.0 <cr>
RDSHost(config)> end
RDSHost> write terminal <cr>
...
access-list SNMP-permit 192.168.1.0 255.255.255.0
...
Using no access-list SNMP-permit command
• The no access-list SNMP-permit command deletes SNMP access definitions.
• It is located at the "configure terminal" menu.
Usage
no access-list SNMP-permit <IP address>
Parameter
<IP address>
It is the permitted source IP address/Network.
Example:
RDSHost(config)> no access-list SNMP-permit 192.168.1.0 255.255.255.0 <cr>
RDSHost(config)> end
RDSHost>
Using SNMP-server community command
• The SNMP-server community command defines get and set SNMP community.
• It is located at the "configure terminal" menu.
• The default community is "public".
Usage
SNMP-server community <get | set> <community string>
B-16
June 30, 2006
SG1-UM-8500-03