Service Name Commands - ADC SG-1 User Manual

Appendix B: Redirection Server
S N C
ERVICE AME OMMANDS
Using service-name command
• The service-name command defines the service to be operated for all sessions.
• The command located at the "configure terminal" menu.
Usage
service-name <service name>
Example:
RDSHost> configure terminal <cr>
RDSHost(config)# service-name srv17
Using no service-name command
• The no service-name command disables the operating of a service for all the sessions.
• The command located at the "configure terminal" menu.
Usage
no service-name
Example:
RDSHost> configure terminal <cr>
RDSHost(config)# no service-name
Using event-level command
• This command defines the event level to log and the media to use for logging.
• The command is located at the "configure terminal" menu.
B-4
June 30, 2006
SG1-UM-8500-03