Using Poweroff Command; Snmp Commands - ADC SG-1 User Manual

June 30, 2006
Using write memory command
• The write memory command writes the running RDS configuration to the NV memory.
• It is located at the "main" menu.
Usage
write memory
Example:
RDSHost>
RDSHost> write memory <cr>
RDSHost>
U P
SING OWEROFF
• The poweroff command brings the system down in a secure way.
• It is located at the "main" menu.
Usage
poweroff
Example:
RDSHost>
RDSHost> poweroff
RDSHost> system is shutting down...
SNMP C
OMMANDS
Using access-list SNMP-permit command
• The access-list SNMP-permit command enables SNMP access command.
• It is located at the "configure terminal" menu.
Usage
access-list SNMP-permit <IP address> <source mask>
SG1-UM-8500-03
C
OMMAND
Appendix B: Redirection Server
B-15