ADC SG-1 User Manual page 150

Chapter 7: Second Level Commands
Using the no vrrp command
Host(config)# no vrrp interface
This command deletes the virtual router configuration in the system.
Usage
no vrrp interface <Ethernet | VLAN> <slot number> \ <port number> [\ <VLAN ID>]
<number>
Parameter(s)
Parameter
<Ethernet | VLAN>
<slot number>
<port number>
<VLAN ID>
<number>
Example(s)
Host(config)# no vrrp interface Ethernet 0\1 1
Using the vrrp preempt command
Host(config)# vrrp preempt interface
• Executing the vrrp preempt interface command orders a backup system to become active (become the
master) if it is configured to the highest virtual router priority.
• Executing the vrrp preempt interface command on a backup system, which is in a lower priority than the
master, does not change the master and backup activity.
Usage
vrrp preempt interface <Ethernet | VLAN> <slot number>\<port number> <priority>
enable
Parameter
<Ethernet | VLAN>
<slot number>
<port number>
<priority>
7-70
Table 7-18. no vrrp command parameters
Description
The interface should be Ethernet or
VLAN.
Slot number.
Physical port number.
VLAN ID number.
Virtual Router Group Number (VRID). 1 to 15
Table 7-19. vrrp preempt command parameters
Description
The interface should be Ethernet or
VLAN.
Slot number.
Physical port number.
VRRP router priority value.
June 30, 2006
Legal values/range
Ethernet, VLAN
0, 1
1 to 3
Legal values/range
Ethernet, VLAN
1, 1
1 to 3
1 to 254
SG1-UM-8500-03