ADC SG-1 User Manual page 90

Chapter 7: Second Level Commands
Usage
interface vlan <slot number> \<port number> \<vlan id> <IP address> <mask>
[name <VLAN name> | QinQ <start ID><range>]
Parameter(s):
<slot number>
Slot number of the physical card.
<port number>
Port number of the card (1 or 2).
<vlan id>
VLAN interface identifier; valid number range is 1 to 4095.
<IP address>
IP address for the VLAN.
<mask>
Subnet mask for the VLAN.
[VLAN name]
It is a unique alphanumeric name assigned to the VLAN (it is 1 ÷ 64 alphabetic characters).
<start ID>
This is the start QinQ VLAN ID; valid number range is 2 to 4095.
<range>
This is the QinQ VLAN range; valid number range is 1 to 4095.
Example(s)
Host(config)# interface vlan 1\2\32 192.168.3.4 255.255.255.0 name ADC-R
Host(config)# interface vlan 1\2\233 24.36.1.12 255.255.255.0 name Kenvelo
Host(config)# interface vlan 3 1\1 192.168.1.1
Note: The system should refuse the VLAN command when wrong slot\port parameters are configured.
Host(config)# vlan 3 1\3
Operation error
Wrong slot\port
7-10
255.255.255.0 QinQ 20 100
June 30, 2006
SG1-UM-8500-03