Command-Line Editing - ADC SG-1 User Manual

June 30, 2006
C -L E
OMMAND INE DITING
The command-line interface provides a DOS-like environment for editing. It provides special key functions and other
special functions developed for a VT100-type terminal.
Note: Commands may not be recognized under some vendor's versions of Telnet. With Microsoft®
Windows® HyperTerminal, or other terminal emulation programs, you may need to set the terminal
preferences to VT100 arrows to use these functions (see
Use This Feature:
Up arrow key
Down arrow key
Tab key
SG1-UM-8500-03
Table 3-3. Navigation Commands
Provide the capability to scroll backward through
a list to retrieve information.
Provide the capability to scroll forward through a
list to retrieve information.
Allows the completion of a command given the
input of at least two characters and no other
ambiguous commands occur.
Chapter 3: Command-Line Interface (CLI)
Table 3-3 on page 3-3).
To:
3-3