ADC SG-1 User Manual page 75

June 30, 2006
show arp command
This command displays the arp table information.
Host(debug)# show arp
Usage
Show arp [<index><NextAddress>]
Parameter(s)
<index>
The interface on which this entry's equivalence is effective. Numbers are 1 to 65,000.
<NextAddress>
This is the IP address corresponding to the media-dependent "physical address. It should be a legal IP address.
Example
Host(debug)# show arp
IfIndex PhyAddress
1 000000000000
4004 00D0B715A7E3
4004 0001AF0A1CB3
4004 00D0B7174CF7
4005 0001AF0A1CB2
SG1-UM-8500-03
NetAddress MediaType
127.0.0.1 static
172.16.1.1 non-volatile
172.16.1.13 static
172.16.1.15 dynamic
172.16.13.193 static
Chapter 6: First-Level Commands
6-39