Using Reset Configuration Command; Http Commands - ADC SG-1 User Manual

June 30, 2006
Parameter
<community string>
It is an Alpha community numeric string.
Example:
RDSHost(config)> SNMP-server community set test <cr>
RDSHost(config)> end
RDSHost> write terminal <cr>
...
SNMP-server community set test
...
U R C
SING ESET ONFIGURATION
• The reset configuration command deletes the RDS stored configuration.
• It is located at the "ADC" menu.
Usage
reset configuration
HTTP C
OMMANDS
Using http-proxy-server port command
• The http-proxy-server port command defines the supported Http-proxy server posts in the system.
• The command is located in the "configure terminal" menu.
• The total available http-proxy-server ports are 3.
SG1-UM-8500-03
C
OMMAND
Appendix B: Redirection Server
B-17