Table of Contents
Advertisement
June 30, 2006
Using the service internal command
Host(config)# service internal
The system default internal service is Framed-PPP. When configured to the default value, write terminal does not
present the configuration line.
Usage
service internal <Framed-PPP | VPDN <tunnel id> <l2tp tunnel password> <Primary IP
address> [Secondary IP address]>
Parameter(s)
Parameter
<Tunnel id>
<L2tp tunnel password>
<Primary IP address>
<Secondary IP address>
Example(s)
Host(config)# service internal vpdn oipoy bbbdfe 9.22.4.12 10.9.8.33
SG1-UM-8500-03
Table 7-9. service internal parameters
Description
The tunnel ID.
The password used to authenticate to a
remote server.
The internal service line definition, as
defined in VSA.
The internal service line definition, as
defined in VSA.
Chapter 7: Second Level Commands
Legal values / range
Alpha numeric string (up to 64
characters)
Alpha numeric string (up to 64
characters)
IP address
IP address
7-45
Advertisement
Table of Contents
