Authentication Commands - ADC SG-1 User Manual

June 30, 2006
Using no interface VLAN command
Host(config)# no interface vlan
This command deletes a VLAN definition for the Ethernet interface.
Usage
no interface vlan <slot number> \ <port number> < id>
Parameter(s)
<slot number>
This is the slot number of the physical card.
<port number>
This is the port number of the card (1 or 2).
<id>
This is the VLAN interface identifier; valid number range is 1 to 4095.
Example(s)
Host(config)# no vlan 3 1\1
A C
UTHENTICATION
Using the password pre-authentication command
Host(config)# password pre-authentication
This command defines the system pre-authentication password.
Usage
password pre-authentication <password>
For <password> options, see
SG1-UM-8500-03
OMMANDS
Table 4-1, "Default Username/Password," on page
Chapter 7: Second Level Commands
4-1.
7-11