Table of Contents
Advertisement
Chapter 7: Second Level Commands
Parameter
<Ethernet | VLAN>
<slot number>
<port number>
<VLAN ID>
<number>
IP address
<priority value>
<on | off>
The following examples use two SCCs (Service Creation Cards):
Example 1 (SCC1 configuration):
Host(config)# vrrp interface Ethernet 0\1 1 ip 192.168.1.3 priority 200
Example 2 (SCC2 configuration):
Host(config)# vrrp interface Ethernet 0\1 1 ip 192.168.1.3 priority 100
The following two examples show the configuration with preemption capabilities:
7-68
Table 7-17. vrrp command parameters
Description
The interface should be Ethernet or
VLAN.
Slot number.
Physical port number.
VLAN ID number.
Virtual Router Group Number (VRID). 1 to 15
IP address of the virtual router.
VRRP router priority value.
VRRP preemptive mode.
June 30, 2006
Legal values/range
Ethernet, VLAN
0, 1
1 to 3
Legal IP address
1 to 254
On or off (default value is off)
SG1-UM-8500-03
Advertisement
Table of Contents
