Default Gateway Commands - ADC SG-1 User Manual

Appendix B: Redirection Server
D G
EFAULT ATEWAY
Using ip default-gateway command
• The command is located at the "configure terminal" menu.
• It configures the system default gateway.
• The change is affecting immediately.
Usage
ip default-gateway <gateway IP address>
Parameter
<gateway IP address>
It is the IP address of the Default gateway.
Using no ip default-gateway command
• The command is located at the "configure terminal" menu.
• It deletes the system default gateway.
• The change is affecting immediately.
Usage
no ip default-gateway
Example:
Host(config)# no ip default-gateway <cr>
Host(config)#
When assigning a default-gateway that is not in the subnet of the Ethernet interface, the system should ignore the
command and indicates the reason.
B-12
C
OMMANDS
June 30, 2006
SG1-UM-8500-03