User Interface - Control Panel - Siemens SINAMICS S120 Commissioning Manual

Startdrive commissioning tool

2.4 User interface - Control panel

2.4 User interface - Control panel
The drive control panel (see Chapter "Using the control panel (Page 209)") is used to control
and monitor individual drives. You traverse drives with the control panel by specifying values.
Depending on the operating mode, these are, for example, speed setpoints.
The following figure shows the various components of the control panel:
①
②
③
④
⑤
⑥
⑦
⑧
Figure 2-10
44
Activate/deactivate master control
Switch infeed on and off
Drive Off (OFF)
Set drive enable
Select operating mode
Control drive
Drive status
Actual values
Control panel
Commissioning with Startdrive
Commissioning Manual, 11/2017, 6SL3097-4AA10-0BP1