Siemens SINAMICS S120 Commissioning Manual page 118

Commissioning
4.4 Creating a project offline in Startdrive
3. Drag the unspecified motor to the lower area of the Motor Module.
Figure 4-33
4. Click the unspecified motor in the device view.
5. Open the Inspector window if it has still not been opened or displayed.
6. Select the "Motor details" item in the secondary navigation of the Inspector window.
The "Motor details" input screen form is divided into the sections:
– Rating plate values
– Motor brake (see Chapter"Adding a standard motor (Page 114)")
– Optional motor data (can also be activated)
– Equivalent circuit diagram data (can also be activated)
118
Motor inserted
Commissioning with Startdrive
Commissioning Manual, 11/2017, 6SL3097-4AA10-0BP1