Siemens SINAMICS S120 Commissioning Manual page 138
With startdrive
Hide thumbs
Also See for SINAMICS S120:
- Function manual (1094 pages) ,
- Diagnostic manual (947 pages) ,
- Manual (848 pages)
Table of Contents
Advertisement
Commissioning
4.5 Establishing an online connection to the drive unit
IP addresses in the project
A CU320-2 PN is created with the following IP addresses in a project in TIA Portal:
● Ethernet commissioning interface X127:
The addresses correspond to the addresses that have already been assigned in the drive
unit.
– IP address: 169.254.11.22
– Subnet mask: 255.255.0.0
● PROFINET interface X150:
The following addresses are assigned for X150:
– IP address: 192.168.0.1 (example)
– Subnet mask: 255.255.255.0
PROFINET addresses lie in the area of the PROFINET subnet of a SIMATIC S7 PLC
control, so that you can network the drive unit with a control system without having to adapt
the subnet mask and IP address.
Figure 4-44
138
CU320-2 PN interfaces
Commissioning with Startdrive
Commissioning Manual, 11/2017, 6SL3097-4AA10-0BP1
Advertisement
Table of Contents
