Siemens SINAMICS S120 Commissioning Manual page 43

The dialog has the following structure:
①
Creation information (optional)
②
The components assigned to the modules or main components
③
Non-assignable components
④
Activates the parallel connection view.
In the parallel connection view, only the parallel connection-capable components are displayed.
⑤
Drive object type of the motor controls
⑥
Columns of results table:
Type of the drive unit
•
Component type
•
Identification via LED. Is controlled on the Control Unit via parameters p9210 and p9211.
•
DRIVE-CLiQ connection of the component
•
Article number of the component
•
Figure 2-9 Device configuration detection
Commissioning with Startdrive
Commissioning Manual, 11/2017, 6SL3097-4AA10-0BP1
Startdrive commissioning tool
2.3 User interface - parameterization
43