Additional Modules; Control Supply Module; Smc10/Smc20 Sensor Module Cabinet - Siemens SINAMICS S120 Commissioning Manual

5.2.3

Additional modules

5.2.3.1

Control Supply Module

Table 5- 20 Control Supply Module – description of the LEDs
LED Color
READY –
Green
DC LINK –
Orange
Red
5.2.3.2

SMC10/SMC20 Sensor Module Cabinet

Table 5- 21 Sensor Module Cabinet 10/20 (SMC10/SMC20) – description of the LEDs
LED Color
RDY –
READY
Green
Orange
Red
Green/red Flashing
Green/
orange
or
Red/
orange
Commissioning with Startdrive
Commissioning Manual, 11/2017, 6SL3097-4AA10-0BP1
State Description, cause
off Electronic power supply is missing or outside permissible
tolerance range.
Continuous Component is ready to operate.
light
off Electronic power supply is missing or outside permissible
tolerance range.
Continuous DC link voltage within permissible tolerance range.
light
Continuous DC link voltage outside permissible tolerance range.
light
State Description, cause
off Electronic power supply is missing or outside permissible
tolerance range.
Continuous The component is ready for operation and cyclic DRIVE-
light CLiQ communication is taking place.
Continuous DRIVE-CLiQ communication is being established.
light
Continuous At least one fault is present in this component.
light
Note:
LED is controlled irrespective of the corresponding mes-
sages being reconfigured.
Firmware is being downloaded.
light 0.5 Hz
Flashing Firmware download is complete. Wait for POWER ON
light 2 Hz
Flashing Component recognition via LED is activated (p0144).
light
Note:
Both options depend on the LED status when module
recognition is activated via p0144 = 1.
Diagnostics
5.2 Diagnostics using LEDs
Remedy
–
–
–
–
–
Remedy
–
–
–
Remedy and
acknowledge fault
–
Carry out a POWER
ON
–
321