Displaying Control/Status Words - Siemens SINAMICS S120 Commissioning Manual

5.3.4.2

Displaying control/status words

Definition
The control and status words are displayed in the function view for diagnostic purposes in
the "Control/status words" mask. The screen form comprises 2 parts located next to one
another in which a group of control and status words can be displayed using a drop-down
list.
Figure 5-10
The following groups can be displayed:
● Control word sequence control infeed (r0898)
● Status word sequence control infeed (r0899)
● Control word, faults/alarms (r2138)
● Status word, faults/alarms 1 (r2139)
● Status word, faults/alarms 2 (r2135)
● Infeed status word (r3405)
Selecting a group of control and status words
1. In one of the 2 drop-down lists, select the required group of control and status words.
The corresponding display and interconnection fields are displayed on the side of the
mask on which you made the setting in the drop-down list.
An illuminated LED display means that the appropriate bit of the control or status word is
set.
2. If you want to display the values of several groups next to one another, set the other
desired groups in the other two drop-down lists
Commissioning with Startdrive
Commissioning Manual, 11/2017, 6SL3097-4AA10-0BP1
Control words and status words
Diagnostics
5.3 Diagnostics via Startdrive
353