Downloading A Program And Parameters - Delta AH Series Operation Manual

AH Mo t io n C on tr o ll er – O p er a t io n M a nu a l
4.6.2

Downloading a Program and Parameters

If ISPSoft is connected to a PLC normally, the parameters and the program in the project can be downloaded to the PLC.
First, start ISPSoft and open the project created in the previous sections. In this example, two types of parameters are
downloaded to the CPU module. They are the hardware configuration and the program.
 Downloading the hardware configuration
(1) Double-click HWCONFIG in the project management area to open the HWCONFIG window.
(2) The hardware configuration is displayed in the window. Before the hardware configuration is downloaded to the
_4
CPU module, you have to make sure that the actual hardware configuration is the same as the hardware
configuration in the window.
4 - 3 8