Basic Editing - Connecting A Contact In Parallel - Delta AH Series Operation Manual

AH Mo t io n C on tr o ll er – O p er a t io n M a nu a l
4.5.5

Basic Editing - Connecting a Contact in Parallel

(1) Click on the toolbar, and then move the mouse cursor to the input contact in network 2. The mouse cursor will
appear as a contact. Move the mouse cursor to the button of the input contact in network 2. After the mouse cursor
appears as
parallel.
(2) Write the program in network 2 shown below in the way described above.
_4
Additional remark
After you select a group of contacts, you can connect a contact to the group of contacts in the way described above.
4 - 2 8
, you can click the left mouse button. A contact will be connected to the input contact in network 2 in