Basic Editing─Creating A Comparison Contact And Typing A Constant - Delta AH Series Operation Manual

AH Mo t io n C on tr o ll er – O p er a t io n M a nu a l
4.5.8
Basic Editing─Creating a Comparison Contact and Typing a Constant
A comparison contact can be inserted not only in one of the three ways described in section 4.5.7, but also by means of
the following steps. You need to put network 7 under network 6, and write the program shown below.
(1) Click
(2) Click on the toolbar, and then move the mouse cursor to the position where the comparison contact will be
inserted. The mouse cursor appears as a comparison contact when the mosue is moved to the left side of the red
frame, the right side of the red frame, or the bottom of the red frame. You can decide where to insert the comparison
contact. After you decided on a position, you can click the left mouse button to insert the comparison contact.
_4
Write the program shown below in the way described above. If you want to type a decimal value in ISPSoft, you can type it
directly. If you wan to type a hexadeicmal value in ISPSoft, you have to type "16#" and the hexadecimal value, e.g.
16#7FFF. In ISPSoft, an octal value is preceded by 8#, and a binary value is preceded by 2#.
4 - 3 2
on the toolbar, and then select a type (>= in this example).