Fuel Injector Servicing; Reports - BRP Evinrude E-TEC Series Service Manual

ENGINE MANAGEMENT MODULE (EMM)
DIAGNOSTIC SOFTWARE FUNCTIONS

Fuel Injector Servicing

All E-TEC fuel injectors use software program-
ming to compensate for variations in fuel flow.
Each injector and its location on the outboard is
identified by the EMM. DO NOT install an injector
without updating the compensation software.
To install a service injector, click the "Replace"
button on the Injector Coefficients screen and
select the file for the replacement injector. Refer to
Vapor Separator and Fuel Injector Service on
p. 132.
64

Reports

Engine reports provide service records and can
be used to document the running history of an out-
board. Reviewing this information can help iden-
tify or resolve some service issues.
Click the print button in a window of the diagnos-
tics software to print engine data, or to export the
information to a computer file.
2
1. Print button
2. Print/Export options
008101
Engine Report data files
1
008145
008096