BRP Evinrude E-TEC Series Service Manual page 48

ENGINE COVER SERVICE
LOWER COVER SERVICE
Start the bottom front screw next to draw cover
halves together.
1
1. Start this screw second
Install the front latch sleeve and start the top front
screw next to draw cover halves together.
1
1. Start this screw third
46
Install remaining cover screws and tighten all
screws to 24 to 36 in. lbs. (3 to 4 N·m).
1
007312
1. Lower cover screws
Install cable entry cover grommets, cable entry
cover and cable entry cover screws. Tighten
screws to 24 to 36 in. lbs. (3 to 4 N·m).
Install trim and battery cable grommet on port
cover.
1
007310
1. Grommet
2. Trim cable (if equipped)
3. Battery cable
1
007309
2
3
007313