ELECTRICAL AND IGNITION
ELECTRIC STARTER SERVICING
Apply Locquic Primer and Screw Lock to the
threaded portion, and install the two thru-bolts.
Tighten bolts to a torque of 100 to 110 in. lbs. (11
to 12.5 N·m).
Lubricate the splines (helix) of starter pinion shaft
with Starter Bendix Lube. DO NOT use liquid or
aerosol spray lubricants.
110
Install pinion, spacer and spring.
Install spacer and retaining nut. Tighten nut to a
torque of 20 to 24 ft. lbs. (27 to 33 N·m).
002306
Be sure spacer is not caught between shaft and
retaining nut and that spacer is free to move.
002307
To test the assembly and operation of the starter,
refer to No Load Current Draw Test on p. 97.
007440
007441
007442