BRP Evinrude E-TEC Series Service Manual page 13

Minimum Battery
Requirements
Alternator
Tachometer Setting
Engine Fuse
Thermostat
Maximum Temperature
Type
Firing Order
Ignition Timing
RPM Limit in Gear
RPM Limit in Neutral
Crankshaft Position Sensor Air
Gap
Spark Plug
Gear Ratio
Lubricant
Capacity
Shift Rod Height
Shift Cable Stroke
Lubrication
Fluid Capacity
Trim Range
Tilt Range
15 HO Models
640 CCA (800 MCA) or 800 CCA (1000 MCA) below 32° F (0° C)
15-Amp fully regulated Refer to Predelivery and Installation Guide for multiple battery
Refer to Emission Control Information Label
†
Champion QC10WEP @ 0.028 ± 0.003 in. (0.71 mm)
HPF Pro in high performance or commercial applications
1.125 to 1.330 in. (28.6 to 33.8 mm) measured between NEUTRAL and FORWARD
Evinrude/Johnson Biodegradable TNT Fluid
REFERENCE INFORMATION
SERVICE SPECIFICATIONS
25 – 30 HP Models
applications.
6 pulse (12 pole)
P/N 967545 – 10 A
143°F (62°C)
212°F (100°C)
IDI Inductive Ignition
1-2
EMM Controlled
6250
1100
Fixed
13:28 (.465)
HPF XR Gearcase Lube
11 fl. oz. (325 ml)
fixed
11.7 fl. oz. (346 ml)
0° to 15°
16° to 65°
1
11