BRP Evinrude E-TEC Series Service Manual page 215

Apply Triple-Guard grease to both sides of thrust
washer. Install thrust washer on steering arm.
1. Thrust washer
Slide the steering arm with thrust washer through
the swivel bracket.
1. Upper thrust washer
Align slots of friction washers with dowel pin.
4
2
1. Steering friction lever
2. Friction washers
3. Friction plate
4. Dowel pin
STERN BRACKET – POWER TILT MODELS
Align dowel pin and steering friction lever as
shown.
1
1
2
007617 5. Dowel pin
6. Steering friction lever
Install locking nut. Temporarily tighten locking nut
three to four full turns. Final adjustment will be
performed later.
1
007685
1. Steering friction nut
3
Apply Triple-Guard grease to both sides of thrust
washer. Install thrust washer on steering arm.
Install lower mount bracket on steering arm.
1
007491
1. Thrust washer
MIDSECTION
007458
1
007684
11
1
007624
213