BRP Evinrude E-TEC Series Service Manual page 173

Remove water intake screens.
1. Water intake screen
Remove the upper shift rod connector screw.
1
1. Shift rod connector screw
Install Universal Puller Set, P/N 378103 and Lift-
ing Eye, P/N 321537, on flywheel and seat the
three screws completely.
1
1. Universal puller set
2. Lifting eye
Fasten appropriate chain hook to eye of tool and
support weight of powerhead with hoist.
Remove the two exhaust housing to powerhead
nuts and six exhaust housing to powerhead
screws.
1
1
007649
1. Powerhead nuts
1. Powerhead screws
Use a suitable tool to carefully separate the pow-
erhead from exhaust housing.
IMPORTANT:
exhaust housing mating surfaces.
Remove clip from upper shift rod and remove shift
rod.
007650
2
2
1. Clip
2. Shift shaft
007740
POWERHEAD
POWERHEAD REMOVAL
Do not damage the powerhead or
2
007741
1
10
007742
171