Unit Assembly Prior To Installation - Regency City CB72EPV-LP Owners & Installation Manual

installation

Unit Assembly Prior to Installation

Before you Start
Removing the Unit from the Pallet
Remove the screws securing the unit to the pallet
Due to the size and weight (581 pounds shipping weight) of the CB72EPV-
-lifting and moving the unit will require 4 people.
Place a length (long enough to get a solid grip on each side) of 2 x 4 through
the opening on each side of the unit as shown.
Lift and move the unit carefully.
Note: Remove 2 x 4's when unit it is in final position.
CB72EPV
Rear Standoffs
The 6 rear standoffs are already attached to the appliance. Do not remove
these standoffs. The 2 top rear standoffs are designed so that screws can be
used to secure the appliance to the rear wall if needed. Studs must be in this
location if choosing to screw this into studs.
Leveling Legs
There are four levelling legs - two on each side, that can be adjusted (with the
supplied tool—found in the manual package) if required.
| City Series CB72EPV
28
tooltip
tooltip
Top rear standoffs
Leveling legs