Regency City CB72EPV-LP Owners & Installation Manual page 96

installation
13. Install Log 7 on the diagonal--line up the left end of Log 7 with the 4th
vertical line from the right on the front of the burner as shown below.
7
Log 7 end lined up with 4th vertical bar
14. Install Log 8--the knot on the log should rest on the 2nd vertical line
from the right at the front of the burner and the left end of the log
should sit 1" from the edge of the panel.
The right end of Log 8 should be 2-1/2" from the right edge of
the burner.
1"
15. Install one box (3.5lbs) of 3/4" black coal around the logs installed on
the panels as shown below.
Black Coal around logs on panels
Do not completely cover side secondary air inlets
Keep front secondary air inlets clear
Correct Black Coal placement - Driftwood logs shown
| City Series CB72EPV
96
919-904
4th vertical bar
8
2-1/2"
Log 8 placement
16. Install Log 9--line up the pin locator on Log 9 with the pin on Log 1
and rest the other end of Log 9 on the rest on Log 4 as shown below.
9
4
17. Install Log 10--line up the pin locator on Log 10 with the pin on Log 1
and rest the other end of Log 9 on the rest on Log 5 as shown below.
5
18. Install Log 11--line up the pin locator on Log 11 with the pin on Log 1
and rest the other end of Log 11 on the rest on Log 7 as shown below.
3
CITY SERIES 72
Log 9
10
Log 10
11
7
Log 11
08.14.18