Table of Contents
Advertisement
installation
Unit Assembly Prior to Installation
Before you start
Removing the unit from the pallet
Unit Assembly Prior to Installation
Unit Assembly Prior to Installation
Before you start
Before you Start - Removing the Unit from the Pallet
Remove the screws securing the unit to the pallet
Removing the unit from the pallet
Unit Assembly Prior to Installation
Before you start
Due to the size and weight (480 pounds shipping weight) of the CV60E--lifting
and moving the unit will require 4 people.
Removing the unit from the pallet
Remove the screws securing the unit to the pallet
Unit Assembly Prior to Installation
Remove the screws securing the unit to the pallet
Place a length (long enough to get a solid grip on each side) of 2 x 4 under
Before you start
Due to the CV60E-1's size and weight (480 pounds shipping weight), lifting
the handle on each side.
Remove the screws securing the unit to the pallet
Removing the unit from the pallet
and moving the unit requires 4 people.
Due to the size and weight (480 pounds shipping weight) of the CV60E--lifting
and moving the unit will require 4 people.
Due to the size and weight (480 pounds shipping weight) of the CV60E--lifting
Lift and move the unit carefully.
and moving the unit will require 4 people.
Place a length of 2 x 4 long enough to get a solid grip on each side under
Place a length (long enough to get a solid grip on each side) of 2 x 4 under
Remove the screws securing the unit to the pallet
each handle.
Note : When in position, the handles may be removed from the unit by removing
Place a length (long enough to get a solid grip on each side) of 2 x 4 under
the handle on each side.
6 screws on each handle. Ensure that when the handles are removed that the
the handle on each side.
Due to the size and weight (480 pounds shipping weight) of the CV60E--lifting
screws are put back into place in all 12 holes locations where the handle had
Lift and move the unit carefully.
and moving the unit will require 4 people.
Lift and move the unit carefully.
Lift and move the unit carefully.
been previously (6 per side). The handles can be recycled.
Place a length (long enough to get a solid grip on each side) of 2 x 4 under
Note : When in position, the handles may be removed from the unit by removing
Note: When in the unit is in position, the handles can be detached by removing
Note : When in position, the handles may be removed from the unit by removing
the handle on each side.
6 screws on each handle. Ensure that when the handles are removed that the
6 screws from each. Ensure the screws are replaced in the holes they were
6 screws on each handle. Ensure that when the handles are removed that the
screws are put back into place in all 12 holes locations where the handle had
Lift and move the unit carefully.
removed from (6 per side). The handles are recyclable.
screws are put back into place in all 12 holes locations where the handle had
been previously (6 per side). The handles can be recycled.
been previously (6 per side). The handles can be recycled.
Note : When in position, the handles may be removed from the unit by removing
6 screws on each handle. Ensure that when the handles are removed that the
Side Standoff Assembly
screws are put back into place in all 12 holes locations where the handle had
Side stando assembly CV60E
been previously (6 per side). The handles can be recycled.
The CV60E-1 has 4 standoffs (2 on each side) that you must assemble before
The CV60E has 4 stando s, 2 on each side that need assembly before installing.
Side stando assembly CV60E
The stando s are shipped in a flat position -- fold the stando and install the
installation. The standoffs are shipped in a flat position. Fold the standoffs
stando onto the unit by sliding the 2 tabs into the slots on the unit. Bend the
The CV60E has 4 stando s, 2 on each side that need assembly before installing.
and install them by sliding the 2 tabs into the slots on the unit. Bend the tabs
Side stando assembly CV60E
The stando s are shipped in a flat position -- fold the stando and install the
tabs to secure. Secure opposite end of the stando with one screw.
and secure the opposite end of each standoff with one screw.
stando onto the unit by sliding the 2 tabs into the slots on the unit. Bend the
Side stando assembly CV60E
tabs to secure. Secure opposite end of the stando with one screw.
The CV60E has 4 stando s, 2 on each side that need assembly before installing.
The stando s are shipped in a flat position -- fold the stando and install the
The CV60E has 4 stando s, 2 on each side that need assembly before installing.
stando onto the unit by sliding the 2 tabs into the slots on the unit. Bend the
The stando s are shipped in a flat position -- fold the stando and install the
stando onto the unit by sliding the 2 tabs into the slots on the unit. Bend the
tabs to secure. Secure opposite end of the stando with one screw.
tabs to secure. Secure opposite end of the stando with one screw.
Rear Stando s
CV60E
Rear Stando s
Rear Standoffs
The 2 top rear stando s are designed so that screws can be used to secure
the appliance to the rear wall if needed. Studs must be in this location if
The 2 top rear stando s are designed so that screws can be used to secure
choosing to screw this into studs.
The 2 top rear stadoffs are designed so that screws can be used to secure the
the appliance to the rear wall if needed. Studs must be in this location if
CV60E
Rear Stando s
choosing to screw this into studs.
appliance to the rear wall if needed. Studs myst be in place for this operation.
CV60E
Rear Stando s
The 2 top rear stando s are designed so that screws can be used to secure
Leveling Legs
the appliance to the rear wall if needed. Studs must be in this location if
choosing to screw this into studs.
There are four levelling legs - two on each side that can be adjusted (with the
The 2 top rear stando s are designed so that screws can be used to secure
Leveling Legs
supplied tool--found in the manual package) if required.
the appliance to the rear wall if needed. Studs must be in this location if
Leveling Legs
choosing to screw this into studs.
There are four levelling legs - two on each side that can be adjusted (with the
Leveling Legs
supplied tool--found in the manual package) if required.
There are four levelling legs, two on each side, that can be adjusted with the
tool found in the manual package.
There are four levelling legs - two on each side that can be adjusted (with the
supplied tool--found in the manual package) if required.
Leveling Legs
There are four levelling legs - two on each side that can be adjusted (with the
supplied tool--found in the manual package) if required.
32 ............................................. |City Series CV60E-1
32 | City Series CV60E-1
tooltip
tooltip
tooltip
tooltip
CV60E
Leveling legs
Leveling legs
Leveling legs
Leveling legs
Advertisement
Table of Contents
