Cb72Epv Painted Panel Installation; Inner Panels - Cb72Epv; Outer Panels - Cb72Epv - Regency City CB72EPV-LP Owners & Installation Manual

CB72EPV Painted Panel Installation

Inner Panels - CB72EPV

CB72E INNER PANELS
The CB72E may be equipped with optional steel inner panels.
CB72E - 7 outer panels and 8 inner panels.
Turn off gas and power to unit and allow to cool to room temperature.
Remove the safety glass and fi rebox glass — see manual for instructions
1. Install 5 inner base panels as shown.
2. On back of fi rebox wall--install 6 screws (loosely) in locations shown
below. Install 3 back panels--hang panels on installed screws through
keyhole opening.
3. Reinstall fi rebox glass - see instructions in manual.

Outer Panels - CB72EPV

CB72E OUTER PANELS
1. Install outer side panel as shown below.
2. Install glass stopper (if desired) by sliding down the outside of the
outer side panel.
3. Slide backwall outer panel behind glass stopper bracket (if installed).
4. Install front end panel-place on unit as shown below.
installation
CITY SERIES
City Series CB72EPV | 83