Regency City CB72EPV-LP Owners & Installation Manual page 91

CITY SERIES 72
6. Place Log 1 behind the burner. Log 1 will rest on the pilot hood and 2
center log guides. Line up the knot on the top of the log with the center
of the pilot hood when seating.
1
Line up knot to center of pilot hood
7. Install Log 2 to the left of Log 1. Line up the left end of Log 2 with the
last vertical line on the back of the burner as shown below.
2
Log 2
8. Install Log 3 to the right of Log 1, rest the left side on the log guide
and the right side on the glass crystals as shown.
3
Log 3
9. Install Log 4 in front of the burner on the panel. Position the left end of
Log 4 2-1/2" to the right of the left end of the burner as shown below.
2-1/2"
Log 4 to edge of burner
919-901
4
10 . The left end of Log 4 should also sit 2" from the edge of the panel
as shown below.
2"
2" to edge of panel
11. Place Log 5 on the center panel in front of the burner. Position the left
end of the log 17" from the left edge of the burner as shown below.
17"
17" from edge of burner
12. Place Log 6 on the diagonal--line up the centre of Log 6 with the
center vertical line at the front of the burner.
Line up with center vertical line + center of pilot hood
2
installation
4
2"
5
6
City Series CB72EPV | 91
08.30.18