Regency City CB72EPV-LP Owners & Installation Manual page 92

installation
13. Install Log 7 on the diagonal--line up the left end of Log 7 with the 4th
vertical line from the right on the front of the burner as shown below.
7
Log 7 end lined up with 4th vertical bar
Note: Log 7 and Log 14 appear very similar. Log 7 has a landing for Log
11--Log 14 does not. Please carefully identify Log 7 before installing.
14. Install Log 8--the knot on the log should rest on the 2nd vertical line
from the right at the front of the burner and the left end of the log
should sit 1" from the edge of the panel.
The right end of Log 8 should be 2-1/2" from the right edge of
the burner.
1"
15. Install one box (3.5lbs) of 3/4" black coal around the logs installed on
the panels as shown below.
Black Coal around logs on panels
| City Series CB72EPV
92
919-901
4th vertical bar
Landing for Log 11
8
2-1/2"
Log 8
Do not completely cover side secondary air inlets
Keep front secondary air inlets clear
Correct Black Coal placement
16. Install Log 9--line up the pin locator on Log 9 with the pin on Log 1
and rest the other end of Log 9 on the rest on Log 4 as shown below.
17. Install Log 10--line up the pin locator on Log 10 with the pin on Log 1
and rest the other end of Log 10 on the rest on Log 5 as shown below.
10
18. Install Log 11--line up the pin locator on Log 11 with the pin on Log 1
and rest the other end of Log 11 on the rest on Log 7 as shown below.
3
CITY SERIES 72
9
4
Log 9
5
Log 10
11
7
Log 11
08.30.18