Setting One Original At A Time - Ricoh FT4018 Operating Instructions Manual

SETTING ORIGINALS IN THE OPTIONAL DOCUMENT FEEDER

Setting One Original At A Time

You can insert one original at a time into the document feeder. The original
is automatically fed onto and removed from the exposure glass.
.
1
Correct any curl, fold, or crease
in the originals before setting.
.
2
Confirm that the Insert Original
indicator is lit before setting the
originals.
.
3
Confirm that no previous originals
remain on the exposure glass.
.
4
Adjust the guides to the original
size.
.
5
Set the original face up into the
document feeder until the Insert
Original indicator goes off.
If you are copying a stack of originals
one sheet at a time and you want to
keep them in order, start with the last
page of the originals.
The original guides must touch both
sides of the original.
6
Press the Start key.
24