Setting One Original At A Time In The Document Feeder (Sadf) - Ricoh FT8982 Operating Instructions Manual

Set the originals face down into
the document feeder until the In-
sert Original indicator goes off.
Set the original stack so that the
leading edge is at an angle with the
bottom of stack forward, and the top
back as shown in the illustration.
The last page should be on the top.
Do not stack originals above the limit
mark.
The guide must touch the front side
of the originals.
SETTING ONE ORIGINAL AT A TIME IN THE
You can insert one original at a time into the document feeder. The original
is automatically fed onto and removed from the exposure glass.
Correct any curl, fold, or crease
in the originals before setting.
Confirm that the Insert Original
indicator is lit before setting the
originals.
Confirm that no previous originals
remain on the exposure glass.

SETTING ONE ORIGINAL AT A TIME IN THE DOCUMENT FEEDER (SADF)

DOCUMENT FEEDER (SADF)
29