Power Connection; Access To Copier - Ricoh FT4018 Operating Instructions Manual

Power Connection

When the main switch is in the Stand-by position,the optional anticondensation
heaters are on. In case of emergency,unplug the machine's power cord.
Connect the copier to a power source meeting the specifications given on the
inside front cover of this manual.
Avoid multiwiring.
Make sure that the wall outlet is near the copier and easily accessible.
Make sure the plug is firmly inserted in the outlet.
Voltage must not fluctuate more than 10%.
Do not set anything on the power cord.
Always turn the copier off when you have finished copying for the day, but
leave it plugged in.

Access To Copier

Place the copier near the power source, providing clearance as shown.
More than 20 cm, 7.9"
More than 10 cm, 4.0"
Copier
More than 70 cm, 27.6"
WHERE TO PUT YOUR COPIER
More than 21 cm, 8.1"
71