Image Quality; Image Density Level; Side Full Image; Tray - Ricoh FT7950 Operating Instructions Manual

USER TOOLS

7 Image Quality

menu

Image Density Level

3 Side Full Image

8 Tray

menu

Paper Tray Priority

Auto Tray Switching

9 Management setting

menu

Set User Code(s)

100
Selects the density level of the image.
Note
Default: [Centre].
The machine erases frame areas with a width of approximately 2.5 mm at
the top, bottom, and right edges when [No] is selected.
Note
Default: OFF
Specifies the tray that is to be selected by default when a paper tray key is
displayed or Auto Paper Select is selected.
Note
Default: OFF.
The machine automatically selects the paper tray that is loaded with paper that is
identical to the current paper in size and orientation and continues copying when
the current paper runs out. This is called the Auto Tray Switching function. Auto
Tray Switching enables or disables this function.
Note
Default: ON
Register, changes, or deletes user codes (8 digits maximum).
Note
You can add a maximum of 500 user codes.
The counter value is not cleared when a user code is changed.
The counter is automatically cleared when a user code is cleared.
A If an access code is defined, enter the access code with the {Number}
keys and press the {#} key.
B Select [Set User Code(s)].
Description
Description
Description