Registering a User Code
This section describes how to register a user code.
A
Press [System Settings].
B
Press [Administrator Tools].
C
Press [Address Book Management].
D
Check that [Program / Change] is selected.
E
Press the name whose code is to be registered, or enter the registered
number using the number key.
You can search by the registered name, fax number, user code, folder name,
or e-mail address, or IP-Fax destination.
F
Press [Auth. Info].
G
Enter the user code using the number keys, and then press {#} key.
If you make a mistake, press [Clear] or the {Clear/Stop} key.
H
Press [TNext] twice.
Authentication Information
7
213