Removing The Server From The Rack; Installing The Server In The Rack - Avaya Aura S8800 Maintaining

Removing the server from the rack

Procedure
1. Turn off the server and all attached devices.
2. Label and disconnect all power cords and external cables.
3. Push the locking levers (1) forward. See the following figure.
4. Lift up the front of the server (2). See the preceding figure.
5. Pull the server out of the rack (3). See the preceding figure.

Installing the server in the rack

Procedure
1. Pull the slide rails forward (1) until they click, two times, into place. See the following
Maintaining the Avaya S8800 Server for Avaya Aura
figure.
®
SIP Enablement Services
Removing the server from the rack
November 2009 9