Chapter 2: Replace Avaya Ses S8800 Server; Maintenance Procedures; Reuse Of Hardware Components In Replacement Servers; Required Equipment And Tools - Avaya Aura S8800 Maintaining

Server for sip enablement services
Hide thumbs Also See for Aura S8800:
Table of Contents

Advertisement

Chapter 2: Replace Avaya SES S8800

Maintenance Procedures

The maintenance procedures for Avaya S8800 Server in simplex, cable duplicated and
network duplicated configurations are similar.
See connection schema for details:
simplex server
cable duplicated servers
network duplicated servers

Reuse of hardware components in replacement servers

When you replace the Avaya S8800 Server, you must reuse the following components:
• DIMMs if more than two (4 GB capacity)
• Hard disk drives
You must remove these components from the defective server and install them in the
replacement server.

Required equipment and tools

• Replacement Avaya S8800 Server
• #2 cross-point (Phillips) screwdriver or 3/8 inch flathead screwdriver
• USB keyboard, USB mouse, and monitor
• Electrostatic wrist ground strap and mat
Maintaining the Avaya S8800 Server for Avaya Aura
Server
on page 11
on page 12
on page 12
®
SIP Enablement Services
November 2009
7

Advertisement

Table of Contents
loading

Table of Contents