Installing The Dimm Air Baffle - Avaya Aura S8800 Maintaining

4. Turn the memory module so that the memory module keys align correctly with the
5. Insert the memory module into the connector by aligning the edges of the memory
6. Firmly press the memory module straight down into the connector by applying
7. Replace the air baffle over the memory modules. Make sure all cables are out of
8. Install the cover.
9. Reconnect the external cables and power cords.
10. Turn on the attached devices and the server.
Related topics:
Installing the server cover
Sequence for populating DIMM connectors
Removing the DIMM air baffle

Installing the DIMM air baffle

Installing the DIMM air baffle
About this task
You must install the DIMM air baffle after you install a memory module.
Caution:
For proper cooling and airflow, replace the air baffle before you turn on the server. Operating
the server with an air baffle removed might damage server components.
Maintaining the Avaya S8800 Server for Avaya Aura
connector.
module with the slots at the ends of the memory module connector.
pressure on both ends of the memory module simultaneously.
The retaining clips snap into the locked position when the memory module is firmly
seated in the connector.
Important:
If there is a gap between the memory module and the retaining clips, the memory
module has not been correctly inserted. Open the retaining clips, remove the
memory module, and then reinsert it.
the way.
When you install or remove memory modules, the server configuration information
changes. When you restart the server, if a monitor and keyboard are connected,
the system displays a message that indicates that the memory configuration has
changed.
on page 16
on page 19
on page 23
on page 17
®
SIP Enablement Services
Replacing memory modules
November 2009 23