Pci Led Is Lit - Avaya Aura S8800 Maintaining

3. Remove one of the power supplies to isolate the failed power supply.
4. Replace the failed power supply.
Related topics:
Removing a power supply
Removing a power supply
Installing a power supply
Installing a power supply
Power supply LEDs
Power supply LEDs

PCI LED is lit

The PCI LED on the light path diagnostics panel is lit when an error occurs on a PCI bus or on
the system board. An additional LED is lit next to a failing PCI slot.
Troubleshooting steps
Procedure
1. Check the LEDs on the PCI slots to identify the component that caused the error.
2. If you have a monitor, check the system error log for information about the error.
3. If you cannot isolate the failing PCIe card by using the LEDs and the information in
4. Reseat the failing PCIe card.
5. Replace the server.
Related topics:
Removing a PCIe card
Installing a PCIe card
Removing a PCIe card
Installing a PCIe card
Maintaining the Avaya S8800 Server for Avaya Aura
on page 31
on page 31
on page 32
on page 32
on page 51
on page 51
the system error log, remove one card at a time from the failing PCI bus. Restart
the server after each card is removed.
Troubleshooting light path diagnostic LEDs
®
SIP Enablement Services November 2009 63