Avaya Aura S8800 Maintaining page 30

Replace FRUs
2. Press down on the riser-card assembly. Make sure that the assembly is fully seated
3. Install the cover.
4. Reconnect the external cables and power cords.
5. Turn on the attached devices and the server.
Related topics:
Installing the server cover
30 Maintaining the Avaya S8800 Server for Avaya Aura
1
2
3
4
in the riser-card connector on the system board.
on page 16
Comments? infodev@avaya.com
PCI riser connector 2
PCI riser-card assembly (full-height,
half-length PCIe cards)
PCI riser-card assembly (low profile
PCIe cards)
PCI riser connector 1
®
SIP Enablement Services November 2009