Installing The Server Cover - Avaya Aura S8800 Maintaining

Server for sip enablement services

Hide thumbs Also See for Aura S8800:

Table of Contents

Replace FRUs

5. Lift the server cover off the server and set it aside.

Installing the server cover

About this task

Important:

Always use an electrostatic-discharge wrist strap or other grounding system when you work

inside the server. See

Procedure

1. Make sure that all internal cables, PCIe cards, and other components are installed

2. Position the cover on top of the server. See the following figure.

Maintaining the Avaya S8800 Server for Avaya Aura

Important:

For proper cooling and airflow, replace the cover before you turn on the server.

Operating the server for extended periods of time (over 30 minutes) with the cover

removed might damage server components.

Protecting against ESD damage

and seated correctly and that you have not left loose tools or parts inside the server.

Also, make sure that all internal cables are correctly routed.

Comments? infodev@avaya.com

Cover

Tab

for more information.

SIP Enablement Services

November 2009

Table of Contents