Installing A Pci Riser-Card Assembly - Avaya Aura S8800 Maintaining

6. Place the riser-card assembly on a flat, static-protective surface.
Next steps
Remove the PCIe card.
Related topics:
Removing a PCIe card
Removing the server cover

Installing a PCI riser-card assembly

Before you begin
Reinstall any PCIe cards and reconnect any internal cables that you removed.
About this task
You must install the PCI riser-card assembly after you replace the PCIe card.
Important:
Always use an electrostatic-discharge wrist strap or other grounding system when you work
inside the server. See
Procedure
1. Align the PCI riser-card assembly with the PCI connector on the system board. See
Maintaining the Avaya S8800 Server for Avaya Aura
4
on page 15
Protecting against ESD damage
the following figure.
Removing and installing a PCI riser-card assembly
PCI riser connector 1
for more information.
®
SIP Enablement Services November 2009 29