Avaya Aura S8800 Maintaining page 33

Hazardous voltage, current, and energy levels are present inside any component that has
this label attached. There are no serviceable parts inside these components. If you suspect
a problem with one of these parts, replace the power supply.
Important:
Always use an electrostatic-discharge wrist strap or other grounding system when you work
inside the server. See
Procedure
1. Touch the static-protective package that contains the power supply to any unpainted
2. Remove the power supply from the package and place it on a static-protective
3. If you are installing a power supply into an empty bay, remove the power-supply
4. Grasp the handle on the back of the power supply and slide the power supply into
Maintaining the Avaya S8800 Server for Avaya Aura
Protecting against ESD damage
metal surface on the server.
surface.
filler panel from the power-supply bay.
the power-supply bay until it clicks. Make sure that the power supply connects firmly
into the power-supply connector. See the following figure.
for more information.
®
SIP Enablement Services
Replacing a power supply
November 2009 33